How to Operate Fire Extinguisher

 

Many unsafe act in our home, offices, etc may cause fire outbreaks and if it happen the following steps may be
followed to quench the early stage fire:

Fire Extinguisher 

• Sound the fire alarm and call the fire department, if necessary.
• Identify a safe evacuation path before approaching the fire. Do not allow the fire, heat, or smoke to come between you and your evacuation path.
• Select the appropriate type of fire extinguisher.
• Discharge the extinguisher within its effective range using the P.A.S.S. methods. 
• Back away from an extinguished fire in case it flames up again.
• Evacuate immediately if the extinguisher is empty and the fire is not out.
• Evacuate immediately if the fire progresses beyond the incipient stage.

How can I operate fire extinguisher successfully? 
Most fire extinguishers can be operated Using P.A.S.S. Technique: 

1. PULL... Pull the pin. This will also break the tamper seal.
2. AIM... Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. NOTE: Do not touch the plastic discharge horn on CO2 extinguishers, it gets very cold and may damage skin.
3. SQUEEZE... Squeeze the handle to release the extinguishing agent.
4. SWEEP... Sweep from side to side at the base of the fire until it appears to be out. Watch the area. If the fire re-ignites, repeat steps 2 - 4.